The project started as a 1 meter Cartesian Cube. But for easy transportation around the house, I had to reduce the printer width to 83 cm from 1 meter. Printer details can be found below ; Max tested printing speed : 150mm/s Best results as of now : 75mm/s with 550 acceleration & 0.04 junction Deviation Printer dimensions : Length : 120 cm Width : 83 cm Height : 83 cm Current Print Dimension : 60 × 60 × 50 cm Print Dimension upgradable : 120*83*83 cm Endstops set to : 48x * 38y * 28z cm Firmware : Marlin 2.0.6.1 upgraded to 2.0.8.2 with SKR2 Steps per unit A4988 (100, 100, 2600, 95) DRV8825 (200, 200, 5200, 190) Iinear Advancement K = 0.22 Baud 250000 # printing Material (All metal) [PLA, ABS, Nylon, ASA, TPU etc] # 1.75mm filament # 100k ntc b 3950 Thermistor # 12v 40w heating cartridge # E3D V6 All Metal J-Head Hotend Extruder PID Tuning 195°c Kp : 41.88 Ki : 7.41 Kd : 59.18 185°c Kp : 42.65 Ki : 7.23 Kd : 62.90 # Fat Nema extreme Extrusio...
An old news 🗞️ but what better ocassion than this to show case them for all of you to watch and read on this joyous 3rd Anniversary of Mels 3D LABS
Been holding back on posting the news, come on I was building things like crazy, skipping lots of meals. Not really proud of the pics that were taken for the news.
The News was featured over 60+ media world wide, you can check mostly all of them down here :
3 years later,
Here we go.
Got the Instgram Verified as a notable person
Check it out, better pics and posts there.
@MelOutsideTheBox
Yea think outside the box 🎁
Comments
Post a Comment